Floor drain FURO 008

Stainless steel floor drain for public wet areas such as swimming pools, shower rooms, changing rooms, saunas, and spa facilities. Available in stock for quick delivery.

Stainless steel floor drain adapted for public wet areas such as swimming pools, shower rooms, changing rooms, saunas, and spa facilities.
The drain's design allows for easy cleaning and maintenance. Supplied with a removable water trap with handle.
Manufactured as standard from acid-resistant stainless steel of quality EN 1.4404 (SS2348) for long durability.
Suitable for embedding in concrete floors.
Adapted for several common floor types and features 360° rotatable and tiltable outlets.
Supplied with a "Classic" grate that is barefoot-friendly and comfortable to walk on.
Equipped with EPDM rubber seals according to EN 681-1 type Wc.
Available for immediate delivery.

Installation:

Delivered pre-assembled and covered to prevent concrete from seeping into the drain during casting.
Spacer strips are included on the adhesion flanges for resin floors.
Sturdy mounting ears for different anchoring in the joist are included.

K3 For areas without traffic. Tested acc. to EN 1253-1 with 2 kN load.
L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.

Variants

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 008 floor drain

Construction dimensions for FURO 008 floor drain:

S1: Ø 350 mm

F1: Ø 270 mm

Drains and channels always have a connection pipe and a flow path to consider. The flow path is always measured at the so-called bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface down to where the water exits the product. For bottom outlets, the measurement point is where the socket begins.

The total height (H) always consists of the depth of the upper part (D) plus the outlet part of the product. If the depth of the upper part is increased, the total height also increases, affecting the product’s flow path.

Dimensions for FURO 008:
The upper section depth (D) varies depending on the flooring type.