Floor drain FURO 141

Floor drain FURO 141

För industri m.m. med tyngre belastningar.
  • Dim. 173 x 173 mm.
  • Kvalitet syrafast rostfritt EN 1.4404 (SS 2348).
  • För ingjutning i betonggolv.
  • Överdelar för klinkergolv, massagolv samt stålslipat betonggolv som är vridbara 360°, vinkelställbara och teleskopiska.
  • Golvbrunnen har urtagbart vattenlås med handtag.
  • EPDM-gummitätningar enligt EN 681-1 typ Wc.
  • Körbart rostfritt spaltlock alt. rostfritt rutgaller.
  • Installationstillbehör som ingår: Levereras täckt för att hindra betong från att rinna ner i brunnen under gjutning. Rejäla fästöron för förankring i bjälklaget. Dessa ger möjlighet till enkel höjdjustering ovanifrån. Vid massagolv ingår ursparingslister på vidhäftningsflänsar.
  • M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.
410343ed-264b-4180-9b04-62ff0f3e54f0.png

Immediate delivery

Variants

Clinker floor K3

Clinker floor K3

Floor material: Clinker in adhesives
Water proofing: Floor without waterproofing
Water proofing drain flange: None
Resin flooring

Resin flooring

Floor material: Resin flooring
Water proofing: Compound floor
Water proofing drain flange: Recess for resin floor
Concrete floor

Concrete floor

Floor material: Concrete floor
Water proofing: Floor without waterproofing
Water proofing drain flange: None
FURO141_BMATT_1.png

Dimensions for FURO 141 floor drain

Byggmått_brunn_SM_1.jpg

Construction dimensions for FURO 141 floor drain:

S1: 310 mm

F1: 230 mm

 

Drains and channels always have a connection pipe and a flow path to consider. The flow path is always measured at the so-called bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface down to where the water exits the product. For bottom outlets, the measurement point is where the socket begins.

The total height (H) always consists of the depth of the upper part (D) plus the outlet part of the product. If the depth of the upper part is increased, the total height also increases, affecting the product’s flow path.

 

Dimensions for FURO 141:
Upper part depth (D) is 36 mm. The total height (H) is then 153 mm.


Slope toward outlet:
The slope toward the outlet is adapted to the product and floor type.

126S75_utlopp.png
S 75

Side outlet Ø75 mm

Capacity 1,6 l/s

126B75_utlopp.png
B 75

Bottom outlet Ø75 mm

Capacity 1,8 l/s
 

126B110_utlopp.png
B 110

Bottom outlet Ø110 mm

Capacity 1,6 l/s
 

Trap

Trap

Trap included as standard.
Can be retrofitted.

Part no. 126VH2

Closable trap

Closable trap

A trap that can be shut off with a key. When choosing accessories, an extension part is required.

Part no. 126VA2

Trap with odor seal

Trap with odor seal

Trap with mechanical odor seal.

Part no. 126VL12

Grid grating, M125

Grid grating, M125

Part no. Z-1GEM17171

Slotted cover, M125

Slotted cover, M125

Slotted cover with seamless, hygienic design.

  • Load class: M125

Part no. Z-1SLM17171

Lifting tool

Lifting tool

Lifting tool for grating and perforated plates.

Part no. 1LK1

Strainer basket

Strainer basket

Smaller filter basket.

  • Volume: 2.5 dl.
  • Capacity: 1.2 l/s.

Part no. 133SK12

Strainer basket, 5 dl

Strainer basket, 5 dl

Filter bucket suitable for drain without a trap and in a drain with additional extension part.

  • Volume: 5 dl.
  • Capacity: 1.5 l/s

Part no. 133SK22

Sand trap 3 dl

Sand trap 3 dl

Sand trap suitable for siphon configuration and in a drain with additional extension part.
Volume: 3 dl.
Capacity: 0.6 l/s.

Part no. 133SF21

Key for water trap

Key for water trap

Key for locking Vater trap 126VA2.

Part no. 1NV2

Inlet part

Inlet part

Inlet part with connection Ø 50 mm.
Increases the total height by 60 mm.

Part no. 1VIN126

Grounding braid

Grounding braid

Grounding braid for equipotential bonding.

Part no. 1VJF

Fixed Drain Grate

Fixed Drain Grate

Grate secured with screws for enhanced safety.

Part no. 1VFG-GL

Radon sealing

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Extension part

Extension part

Provides space for extra-large accessories.
Increases the total height by 60 mm.

Part no. 1VPA126

Mounting, threaded rod

Mounting, threaded rod

Easy adjustment from above.

  • Height 300 mm.
  • Foot diameter = 100 mm.

Part no. 1SB30

Documents

Technical overview
BVB.svg SH.png EPD.png

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us

BIM

Do you need BIM or CAD files for your project? Download the files you need by clicking the buttons below.

Magicad Cloud MagiCAD Selection tool