Floor drain FURO 170

Floor drain FURO 170

För höga hygienkrav inom livsmedelsindustrin m.m.

Kvalitet syrafast rostfritt EN 1.4404 (SS 2348).
För ingjutning i betonggolv.
Fasta överdelar för klinkergolv, massagolv, plastmatta samt stålslipat betonggolv.
Installationstillbehör som ingår: Levereras täckt för att hindra betong från att rinna ner i brunnen under gjutning. Rejäla fästöron för förankring i bjälklaget. Dessa ger möjlighet till enkel höjdjustering ovanifrån. Vid massagolv ingår ursparingslister på vidhäftningsflänsar.

HYGIENUTFÖRANDE INNEBÄR:

Brunnen har rundad botten och sidor som är lätt åtkomliga utan bakteriesamlande spalter.
Vattenlåset och dess tätning är lätt att ta ur för inspektion och rengöring.
Inget vatten står kvar i brunnen när vattenlåset tagits ur.
Alla ytor är i betat utförande.
Brunnarna för klinkergolv är utförda utan dräneringsspalter eller hål vid tätskiktsflänsarna eftersom detta ej kan utföras hygieniskt.

K3 For areas without traffic. Tested acc. to EN 1253-1 with 2 kN load.
L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Clinker floor K1

Floor material: Clinker in adhesives

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K3

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Byggmått_rund_brunn_SM_1.jpg

Trap

Trap

Part no. 220VH12

Trap with mechanical odor stop

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Trap with shut-off function

Part no. 220VA2

Lifting tool

Lifting tool

Lifting tool for grating and perforated plates.

Part no. 1LK1

Strainer basket, 1,2 liters

Strainer basket, 1,2 liters

Stainless steel strainer basket with narrow rim.

Volume: 1.2 liters

Part no. 220SK12

Strainer basket, 2.7 liters

Strainer basket, 2.7 liters

Spacious stainless steel strainer basket. Fits floor drains with spigot design and drains with an additional extension component.

Volume: 2.7 liters
Capacity: 3.0 liters/sec

Part no. 220SK21

Sand trap, 1,5 liters

Sand trap, 1,5 liters

The sand trap fits in gullies and drains with an extension part.

Volume: 1.5 liters.
Capacity: 1.5 liters per second.

Part no. 220SF21

Sand trap, 0.9 liters

Sand trap, 0.9 liters

Volume: 0.9 liters.
Capacity: 1.5 liters per second.

Part no. 220SF61

Key for water trap

Key for water trap

Key for locking Water trap 220VA2.

Part no. 1NV1

Drain without trap

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

Capacity: 6 liters per second

Part no. 1VSU220

Sealant Aqua Tät

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Mounting, threaded rod

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Documents

Technical overview