Entrance drain FURO 056

Entrance drain FURO 056

Robust and flexible entrance drain in acid-resistant stainless steel. The entrance drain is available in two designs to suit different installation environments – adapted for placement under a scraper mat or under a self-supporting grate.

This entrance drain is designed to ensure effective water drainage in public and commercial entrances. Manufactured from acid-resistant stainless steel EN 1.4404 (SS 2348), it offers high corrosion resistance and long service life.

Two Available Configurations

  • Under Scraper Mat – Delivered with a durable grate plate designed for heavy pedestrian traffic, including shopping trolleys and light vehicle traffic, allowing installation directly under a scraper mat.

  • Under Self-Supporting Grate – Designed for placement under a self-supporting grate.
     

Effective Management of Dirt and Water

  • The drain is delivered with two large and liftable sand traps that effectively collect sand and dirt for easy cleaning. Total volume: 4.0 liters.

  • Odor trap prevents unpleasant smells from escaping, even if the water trap dries out.

  • Backwater stop protects against flooding during heavy rain and prevents stormwater from entering the entrance.
     

Safe and Durable Construction

  • Robust design with a durable grate plate (for installation under a scraper mat) designed for heavy pedestrian traffic, including shopping trolleys and light vehicle traffic.

  • EPDM rubber seals according to EN 681-1 type Wc ensure a tight and reliable installation.
     

Flexible and Easy Installation

  • Adjustable and telescopic upper section allows for easy adaptation to floor level.

  • Designed for embedding in concrete floors, ensuring stability and long durability.

  • Removable water trap with handle makes cleaning and maintenance simple.
     

Technical Specification

Material: Acid-resistant stainless steel EN 1.4404 (SS 2348)
Dimensions (mm): Length 600 | Width 400 | Depth 100
Grate plate: Designed for heavy pedestrian traffic (not included for installation under a scraper mat)
Sand trap: 4 liter capacity
Water trap: Removable
Odor trap: Yes
Backwater stop: Yes
Sealing: EPDM rubber according to EN 681-1 type Wc
Installation: Embedded in concrete floor
Connection: Adapted for stormwater drainage

  • L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
  • Entrance drains connected to the stormwater network are always equipped with a backwater valve to prevent flooding during heavy rainfall and to protect the entrance from water intrusion.

Variants

Concrete floor

Concrete floor

Floor material: Concrete floor
Water proofing: Floor without waterproofing
Water proofing drain flange: None
220S75_utlopp.png
S 75

Side outlet Ø75 mm

Capacity 1,5 l/s

220S110_utlopp.png
S 110

Side outlet Ø110 mm

Capacity 1,5 l/s

220B75_utlopp.png
B 75

Bottom outlet Ø75 mm

Capacity 1,5 l/s

220B110_utlopp.png
B 110

Bottom outlet Ø110 mm

Capacity 1,5 l/s

Water trap, odor and backflow stop

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Sand trap box

Sand trap box

Liftable sand trap box that effectively collects sand and debris. Two pieces included.

  • Total volume: 4.0 liters (2.0 liters each)

Part no. 1TSF642

Radon sealing

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Mounting, threaded rod

Easy adjustment from above.

  • Height 300 mm.
  • Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

  • Height: 300 mm
  • Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us

BIM

Do you need BIM or CAD files for your project? Download the files you need by clicking the buttons below.

Magicad Cloud MagiCAD Selection tool