Low-profile floor drain FURO 125

Low-profile stainless steel floor channel specifically designed for renovation and remodeling projects (ROT) requiring high water flow capacity.

The low-profile design of the channel makes it optimal for renovation and conversion projects (ROT) that require high water flow and have tight installation spaces.
It is made of stainless steel EN 1.4301 (SS 2333) or acid-resistant stainless steel EN 1.4404 (SS 2348) for high corrosion resistance and long durability.
Equipped with a internal water trap that provides easy access for maintenance and cleaning.
Stainless steel slip-resistant grate manufactured in sections, where each section has a maximum weight of 6 kg for easy and ergonomic handling.
There is an option to equip the channel with functional accessories and additional details for further customization to specific needs.
Designed for embedding in concrete decks with tops for floor types such as tiled floors, massage floors, plastic mats, and steel-polished concrete floors.

Variable length: 400-2800 mm, in 100 mm intervals.

Installation:

Delivered pre-assembled and covered to prevent concrete from flowing into the channel during casting.
For Resin flooring, spacers are included on the bonding flanges.
Robust anchoring brackets for various anchoring in the deck are included.
Adjustable feet for easy installation and height adjustment are offered. See the Installation Accessories section.

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.

The low-profile design of FURO 125 means that flow capacity is limited. Where large flows are required, FURO 117 should be chosen as the first option.
If, due to limited space in the joist, FURO 125 is still selected, large inflows must be managed to avoid flooding. Note that the specified capacity values apply at a 20 mm overflow.

Variants

Variable length (mm):

Length (L) = 400–2800, in increments of 100

The dimensions refer to the drain's grate size.

Fixed depths (mm):

Channel depth (RD) = 80
Depth at outlet (D) = 160
Waterway (V.g) = 115

Outlet direction:

The outlet can be selected in three different directions, corresponding to clock positions: 6, 9, or 12.

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 125 floor channel

Construction dimensions for FURO 125 floor channel:

S1: 510 mm
F1: 450 mm

S 75

Side outlet Ø75 mm

Capacity 2,2 l/s

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Strainer basket, 7,5 dl

Strainer basket for ROT drain and channel.

Volume: 7.5 dl

Part no. 1SKR1

Sand trap

Sand trap for ROT drain and channel.

Volume: 6, 0 dl

Part no. 1SFR1

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Documents

Technical overview (in swedish)