Terrace drain FURO 192

Terrace drain FURO 192

Stainless steel drain for terraces, courtyards, and garages. The drain is ideal for environments that require durability, long lifespan, and easy installation in combination with bitumen or cast asphalt waterproofing. Available in stock for immediate delivery.
  • The terrace drain is designed for terraces, courtyards, and garages with freeze risk where traditional floor drains with water traps cannot be used.
     
  • It is suitable for installation in concrete slabs.
     
  • The terrace drain is intended for bitumen waterproofing, possibly reinforced with mastic or cast asphalt.
     
  • It comes with a 150 mm wide perforated collar to ensure a watertight seal. The waterproofing membrane is placed locally under the perforated collar and then welded together with the overlaying waterproofing layer, creating a durable and waterproof connection.
     
  • FURO 192 is intended for waterproofing under a construction overlay. The top and bottom parts are ordered separately to suit specific installation requirements.
     
  • The top part is telescopic and adjustable for various construction heights.
     
  • The top is equipped with a stainless steel strainer plate fixed in place.
     
  • Manufactured in EN 1.4404 (SS 2348) for maximum corrosion resistance.
     
  • Equipped with a long, cuttable outlet pipe Ø 110 mm to minimize joints.
     
  • Delivered with a protective cover to prevent construction debris from falling into the outlet pipe during installation, as well as a support ring for mastic and cast asphalt.
     
  • The product is available in stock for immediate delivery.
     

Technical specifications:

Material: Acid-resistant stainless steel EN 1.4404 (SS 2348).
Dimensions: 273 x 273 mm.
Construction height (adjustable):

  • L1: 160–260 mm
  • L2: 160–560 mm
  • L3: 160–860 mm

Outlet pipe: Cuttable Ø 110 mm
Waterproofing collar: 150 mm wide perforated collar for bitumen waterproofing.
Installation accessories included: Protective cover for outlet pipe and support ring for mastic and cast asphalt.

  • L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
  • M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.
  • Terrassbrunnen är avsedd för montage i betongbjälklag med förborrat hål Ø 225 mm. Vid installation i samband med gjutning av betongplattan/bjälklaget bör variantutförande med fästöron väljas.
410343ed-264b-4180-9b04-62ff0f3e54f0.png

Immediate delivery

Variants

Terrace joists

Floor material: Paving stones/Slabs
Water proofing: Bitumen
Water proofing drain flange: 150 mm perforated adhesive flange
FURO192_BMATT_1.jpg

Dimensions for terrace drain FURO 192

*Overbuild height (adjustable):

  • L1 = 160–260 mm
  • L2 = 160–560 mm
  • L3 = 160–860 mm
     

**The support ring is used for mastix and cast asphalt as reinforcement.

FURO192_BMATT_2.jpg

Capacity measurement:

The capacity measurement for the terrace drain has been carried out in accordance with the requirements for roof drains in SS-EN 1253-2, with an overlay height of 160 mm.


Vattenpelare (mm) = Water column (mm)
Flöde (l/s) = Flow (l/s)

220B110122_utlopp.png
B 110

Bottom outlet Ø110 mm

220B160122_utlopp.png
B 160

Bottom outlet Ø160 mm

220S110I22_utlopp.png
S 110

Side outlet Ø110 mm

KUPOLSIL/LÖVSIL

KUPOLSIL/LÖVSIL

För ytor med gräs eller träd.

Part no. 1KSHS2.72.72

Distance rings

Distance rings

Raises the upper part by 20-35 mm.

Part no. 1DS22

Sand trap, 2,4 liters

Sand trap, 2,4 liters

The sand trap can only be selected if the drain lacks a water trap.

  • Volume: 2.4 l
  • Capacity: 5.0 l/s

 

Part no. 220SF52

Electric heating loop, 3 m

Electric heating loop, 3 m

Prevent ice formation with a self-limiting electric heating loop around the outlet.

  • Cable: Delivered pre-assembled with at least 3 meters of electrical cable (without a plug).
  • Power: 20W
  • Connection: Connects to 230 V

 

For more information:
Product information Electric heating loop

Part no. 1VELS

Electric heating loop, 4-12 m

Electric heating loop, 4-12 m

Prevent ice formation with a self-limiting electric heating loop around the outlet.

  • Cable: Delivered pre-assembled with 4-12 meters of electrical cable (without a plug).
  • Power: 20W
  • Connection: Connects to 230 V

 

For more information:
Product information Electric heating loop

Part no. 1VELSL

Anchors

Anchors

Anchors for fixation in the floor structure during the casting of the concrete slab/floor structure.

Part no. 1VMF

Mounting, threaded rod

Mounting, threaded rod

Easy adjustment from above.

  • Height 300 mm.
  • Foot diameter = 100 mm.

Part no. 1SB30

SH.png BVB.svg

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us

BIM

Do you need BIM or CAD files for your project? Download the files you need by clicking the buttons below.

Magicad Cloud MagiCAD Selection tool