Terrace drain, outlet FURO 191

Outlet section for terrace drain with a long, cuttable outlet pipe Ø 75 mm. In stock for immediate delivery.

Outlet section for terrace drain, designed for terraces, courtyards, and garages where there is a risk of freezing and traditional floor drains with water traps cannot be used.

Adapted for installation in concrete slabs and waterproofing layers of bitumen, mastic, or cast asphalt.
Delivered with a 150 mm wide perforated bonding flange for maximum sealing and secure connection.
Cuttable outlet pipe Ø 75 mm minimizes joints and simplifies installation.
Manufactured from acid-resistant stainless steel EN 1.4404 (SS 2348) for maximum corrosion resistance and long service life.
Equipped with a protective cover to prevent construction debris from entering during installation.
Supplied with a support ring for mastic and cast asphalt for easier installation.
In stock for immediate delivery.

Technical specifications

Material: Acid-resistant stainless steel EN 1.4404 (SS 2348).
Outlet: Ø 75 mm cuttable outlet pipe.
Flange: 150 mm wide perforated flange.
Application: Waterproofing layers of bitumen, mastic, or cast asphalt in concrete slabs.
Approvals: FURO 191 meets the requirements of AMA Hus 18, sections JSE.171 and JSE.271. In the version with a 110 outlet, it also complies with Tätskiktsgarantier’s TR-1 regulations for roof drains.

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Terrace joists

Floor material: Paving stones/Slabs

Water proofing: Bitumen

Water proofing drain flange: 150 mm perforated adhesive flange

Dimensions for terrace drain FURO 191

**The support ring is used for mastix and cast asphalt as reinforcement.

See FURO 191, superstructure for specific information about the upper section component.

Capacity measurement:

The capacity measurement for the terrace drain has been carried out in accordance with the requirements for roof drains in SS-EN 1253-2, with an overlay height of 160 mm.

Vattenpelare (mm) = Water column (mm)
Flöde (l/s) = Flow (l/s)

B 75

Bottom outlet Ø75 mm

B 110

Bottom outlet Ø110 mm

S 75

Side outlet Ø75 mm

Electric heating loop, 3 m

Prevent ice formation with a self-limiting electric heating loop around the outlet.

Cable: Delivered pre-assembled with at least 3 meters of electrical cable (without a plug).
Power: 20W
Connection: Connects to 230 V

For more information:
Product information Electric heating loop

Part no. 1VELS

Electric heating loop, 4-12 m

Prevent ice formation with a self-limiting electric heating loop around the outlet.

Cable: Delivered pre-assembled with 4-12 meters of electrical cable (without a plug).
Power: 20W
Connection: Connects to 230 V

For more information:
Product information Electric heating loop

Part no. 1VELSL

Anchors

Anchors for fixation in the floor structure during the casting of the concrete slab/floor structure.

Part no. 1VMF

Förlängt utloppsör med 377 mm Ø75mm

Part no. Z-FLUR-377-75

Förlängt utloppsör med 490 mm Ø75mm

Part no. Z-FLUR-490-75

Förlängt utloppsör med 362 mm Ø110mm

Part no. Z-FLUR-362-110

Förlängt utloppsör med 490 mm Ø110mm

Part no. Z-FLUR-490-110

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Documents

Installation instructions FURO 191

Technical overview

Immediate delivery

Operation and maintenance

Construction declaration

Product Information Electric Heating Coil