Floor drain FURO 152

Golvbrunn med upplyftbar sandfångslåda.

Dim. 300 x 300 mm.
Kvalitet rostfritt EN 1.4301 (SS 2333) alt. syrafast rostfritt EN 1.4404 (SS 2348).
För ingjutning i betonggolv.
Överdelar för klinkergolv, massagolv, plastmatta samt stålslipat betonggolv som är vridbara 360°, vinkelställbara och teleskopiska.
Golvbrunnen har urtagbart vattenlås med handtag.
EPDM-gummipackningar enligt EN 681-1 typ Wc.
Rostfritt rutgaller.
Med upplyftbar sandfångslåda, volym 5 liter.
Sandfångsfunktionen bygger på sedimenteringsprincipen och fungerar bäst vid låga flöden. Vid höga flöden följer det lätta materialet med ut i avloppet.
Installationstillbehör som ingår: Levereras täckt för att hindra betong från att rinna ner i brunnen under gjutning. Rejäla fästöron för förankring i bjälklaget. Dessa ger möjlighet till enkel höjdjustering ovanifrån. Vid massagolv ingår ursparingslister på vidhäftningsflänsar.

L15 For areas with light weight traffic. Tested acc. to EN 1253-1 with 10 kN load.
M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Clinker floor K4

Floor material: Clinker directly on waterproofing layer

Water proofing: Waterproofing layer that can be rolled/spread and connected to a smooth stainless steel flange

Water proofing drain flange: 50 mm wide stainless adhesive flange

Clinker floor K5

Floor material: Clinker directly on waterproofing layer

Water proofing: Clinkers on sandwiched waterproofing membrane

Water proofing drain flange: Clamping flange

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Vinyl flooring

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Vinyl flooring on wooden beams

Floor material: Vinyl flooring 1,5-4 mm

Water proofing: Vinyl flooring

Water proofing drain flange: FURO clamping flange

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 152 sand trap drain

Construction dimensions for FURO 152 sand trap drain:

S1: 550 mm

F1: 490 mm

Drains and channels always have a connection pipe and a flow path to consider. The flow path is always measured at the so-called bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface down to where the water exits the product. For bottom outlets, the measurement point is where the socket begins.

The total height (H) always consists of the depth of the upper part (D) plus the outlet part of the product. If the depth of the upper part is increased, the total height also increases, affecting the product’s flow path.

Dimensions for FURO 140:
Upper part depth (D) is 192 mm. The total height (H) is then 324 mm.

If an extension or inlet part is selected, the total height (H) increases by 82 mm.

Slope toward outlet:
The slope toward the outlet is adapted to the product and floor type.