Robust stainless steel floor channel designed for industrial settings, workshops, and environments with heavy traffic. Long-lasting durability and easy installation in high-load environments for efficient drainage and reliable performance.

Floor channel, width 200 mm FURO 146

Robust floor drain channel in stainless steel with a grating width of 200 mm. Ideal for workshops, industries, and other demanding environments with heavy traffic. The floor drain channel is designed for various common floor types and is manufactured in stainless steel EN 1.4301 (SS 2333) or acid-resistant stainless steel EN 1.4404 (SS 2348) for maximum durability and corrosion resistance.

Manufactured in stainless steel EN 1.4301 (SS 2333) or acid-resistant stainless steel EN 1.4404 (SS 2348).
Designed for embedding in concrete floors.
Adapted for several common floor types and features a 360° rotatable and adjustable outlet.
Removable water trap with handle for easy cleaning and maintenance.
EPDM rubber seals according to EN 681-1, type Wc.
Choose between mesh grating (R50 and M125) and slot cover (M125), with each section weighing a maximum of 8 kg for easy and ergonomic handling. See alternatives under the Grating/Strainer section.

Installation:

Delivered with protective cover to prevent concrete from entering the channel during casting.
Equipped with sturdy anchor brackets for secure attachment to the floor structure.
For resin floors, recess strips on adhesion flanges are included.
Adjustable legs allow easy height adjustment from above (see installation accessories).

Technical specifications

Material: Stainless steel (EN 1.4301 / SS 2333) or acid-resistant stainless steel (EN 1.4404 / SS 2348)
Length (mm): 500–20000 (in 100 mm increments)
Width (mm): 200
Water trap: Removable, with handle for easy cleaning
Rubber seal: EPDM according to EN 681-1, type Wc
Grating options: Stainless steel mesh grating or slot cover

M125 For areas with truck traffic. Tested acc. to EN 1253-1 with 85 kN load.

Variants

Variable length (mm):

Length (L) = 500–20000 (in increments of 100)
Fixed width: 200

The dimensions refer to the channel's grating dimensions.

Variable depth (mm):

Depth (D) = 100, a good choice for lengths up to 8000.
Depth (D) = 150, recommended for lengths 8000–20000.

Outlet placement:
The standard is a centered outlet, but it is possible to choose a different placement.

Specify c/c from the left.

Clinker floor K3

Floor material: Clinker in adhesives

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Resin flooring

Floor material: Resin flooring

Water proofing: Compound floor

Water proofing drain flange: Recess for resin floor

Concrete floor

Floor material: Concrete floor

Water proofing: Floor without waterproofing

Water proofing drain flange: None

Dimensions for FURO 146 floor channel

*The product has a slope towards the outlet.

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards the outlet"

Construction dimensions for FURO 146 floor channel:

S₁= 475 mm
F₁ = 415 mm

Drains and channels always have a connection pipe and their water flow (V.g.) to consider. Water flow is always measured from the so-called bottom line of the pipe.

To facilitate product selection, we specify the total height (H) of our drains and channels. The total height is the distance from the finished floor surface to where the water exits the product. For bottom outlets, the measurement point is where the spigot begins.

The total height (H) is always made up of the top depth (D) plus the outlet section of the product. If the top depth is increased, the total height will also increase, affecting the product's water flow.

Dimensions for FURO 146:

The upper part depth (D) can vary between 100 and 150 mm. (100 mm is standard for lengths up to 9000 mm).
The total height (H) of FURO 148 thus ranges between 217 and 267 mm. (217 mm is standard for sizes up to 8000 mm).
If an extension or inlet part is selected, the total height (H) increases by 60 mm.

Slope toward the outlet:

The product’s slope toward the outlet varies depending on the length and chosen upper part depth. For the standard design with a centrally positioned outlet, the following applies:

For lengths up to 8000 mm and recommended depth of 100 mm, the slope toward the outlet is at least 1%.
For lengths between 8000 – 20 000 mm and recommended depth of 150 mm, the slope toward the outlet is at least 0.9%.

For requirements other than the above recommendations, the slope will be affected.

S 75

Side outlet Ø75 mm

Capacity 1,6 l/s

B 75

Bottom outlet Ø75 mm

Capacity 2,3 l/s

B 110

Bottom outlet Ø110 mm

Capacity 1,9 l/s

Trap

Trap included as standard.
Can be retrofitted.

Part no. 126VH2

Trap with odor seal

Trap with mechanical odor seal.

Part no. 126VL12

Closable trap

A trap that can be shut off with a key. When choosing accessories, an extension part is required.

Part no. 126VA2

Grid, M125

Grid with load class M125

Maximum load: 12500 kg

Part no. Z-GALLER-M125

Grate, M125

Grate with load class M125.

Maximum load: 12500 kg

Part no. Z-SPALTLOCK-M125

Strainer basket

Smaller filter basket.

Volume: 2.5 dl
Capacity: 1.2 l/s

Part no. 133SK12

Strainer basket, 5 dl

Filter bucket suitable for drain without a trap and in a drain with additional extension part.

Volume: 5 dl
Capacity: 1.5 l/s

Part no. 133SK22

Sand trap 3 dl

Sand trap suitable for siphon configuration and in a drain with additional extension part.

Volume: 3 dl
Capacity: 0.6 l/s

Part no. 133SF21

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for water trap

Key for locking Vater trap 126VA2.

Part no. 1NV2

Fastening of perforated plate

Screwed perforated plate. Increases safety by preventing the plate from moving unintentionally.

Part no. 1VFG-115

Extension part

Provides space for extra-large accessories.
Increases the total height by 60 mm.

Part no. 1VPA126

Inlet part

Inlet part with connection Ø 50 mm.
Increases the total height by 60 mm.

Part no. 1VIN126

Radon sealing

Factory-installed radon and waterproofing.

Part no. 1VRT

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Documents

Installation instructions FURO 146 and 148

Technical overview (in swedish)

FURORSK_en-US.pdf

Operation and maintenance

Installation instructions for earth braid