Floor drain FURO 162

Bredd 200 mm. För livsmedelsindustri m.m. med både lättare och tyngre belastningar.

Kan byggas till valfri längd med täthetstestade flänsförband. Bredd 200 mm.
Modullängd max 2950 mm.
Kvalitet rostfritt EN 1.4301 (SS 2333) alt. syrafast rostfritt EN 1.4404 (SS 2348).
För ingjutning i betonggolv.
Överdelar för klinkergolv, massagolv samt stålslipat betonggolv som är vridbara 360°, vinkelställbara och teleskopiska.
Rännans botten är V-formad för att underlätta självrensning.
Golvrännan har utloppsdel med urtagbart vattenlås med handtag.
EPDM-gummitätningar enligt EN 681-1 typ Wc.
Rostfritt, körbart rutgaller utfört i delar med max vikt 8 kg per del.
Installationstillbehör som ingår: Levereras täckt för att hindra betong från att rinna ner i rännan under gjutning. Rejäla fästöron för förankring i bjälklaget. Dessa ger möjlighet till enkel höjdjustering ovanifrån. Vid massagolv ingår ursparingslister på vidhäftningsflänsar.

Variants

Dimensions for FURO 162 floor channel

Construction dimensions for FURO 162 floor channel:

S1: 470 mm

F1: 410 mm

S2: 555 mm

F2: 495 mm

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Part no. 220VA2

Lifting tool

Lifting tool for grating and perforated plates.

Part no. 1LK1

Strainer basket, 2.7 liters

The strainer basket is suitable for drains without a trap and drains with an extension part.

Volume: 2.7 liters
Capacity: 4.0 liters per second

Part no. 220SK41

Strainer basket, 1,2 liters

Volume: 1.2 liters
Capacity: 4.0 liters per second

Part no. 220SK32

Sand trap, 1.5 liters

The sand trap fits in drains with an extension part or without trap.

Volume: 1.5 liters.
Capacity: 1.5 liters per second.

Part no. 220SF41

Sand trap, 0.9 liters

Volume: 0.9 liters.
Capacity: 1.5 liters per second.

Part no. 220SF61

Key for water trap

Key for locking Water trap 220VA2.

Part no. 1NV1

Raising ring

Raising ring for tile floor type K1 with a height of 25 mm

Part no. 220FR12

Inlet part

Inlet part with Ø 50 mm connection. Increases total height by 82 mm.

Part no. 1VIN220

Grounding braid

Grounding braid for equipotential bonding.

Part no. 1VJF

Screwed-down grate

Grating fastened with screws.

Part no. 1VFG

Extension part

Extension part, provides space for extra large accessories. Increases total height by 82 mm.

Part no. 1VPA220

Angle Channel

The channel is manufactured at a 90-degree angle, with L1 and L2 representing the grate dimensions.
The outlet drain is positioned in the angle for effective drainage.

Part no. 1VRGV

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

Capacity: 6 liters per second

Part no. 1VSU220

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Documents

Technical overview