Sko- och stöveltvätt FURO 513

Sko- och stöveltvätt FURO 513

Med stor golvbrunn och sandfång.

Bestående av ett demonterbart rör Ø 51 x 2 mm samt en stor golvbrunn FURO 113 med upplyftbart sandfång.
Valfri längd och bredd.
Kvalitet rostfritt EN 1.4301 (SS 2333) alt. syrafast rostfritt EN 1.4404 (SS 2348).
För ingjutning i betonggolv.
Överdelar för klinkergolv, massagolv, plastmatta eller stålslipat betonggolv.
Golvbrunnen har urtagbart vattenlås med handtag.
EPDM-gummitätningar enligt EN 681-1 typ Wc.
Rostfritt, halkskyddat rutgaller, utfört i delar med max vikt 6 kg per del.
Installationstillbehör som ingår: Levereras täckt för att hindra betong från att rinna ner i brunnen under gjutning (upp till bredd 400 mm). Rejäla fästöron för förankring i bjälklaget. Dessa ger möjlighet till enkel höjdjustering ovanifrån. Vid massagolv ingår ursparingslister på vidhäftningsflänsar.
För CAD och MagiCAD använd 3D-modell för FURO 113.

Variants

Dimensions for shoe and boot washer FURO 513.

Depth: For dimensions larger than 1200 x 600 mm, the depth of the drain increases.

Byggmått_större brunn_BMATT_1.jpg

Construction dimensions for shoe and boot washer FURO 513:

S1: B (Grate dimensions) + 310 mm
F1: B (Grate dimensions) + 250 mm

Trap

Trap

Part no. 220VH12

Trap with mechanical odor stop

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Trap with shut-off function

Part no. 220VA2

Slip-resistant grid, L15

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Lifting tool

Lifting tool

Lifting tool for grating and perforated plates.

Part no. 1LK1

Strainer basket, 1,2 liters

Strainer basket, 1,2 liters

Volume: 1.2 liters
Capacity: 4.0 liters per second

Part no. 220SK32

Sand trap, 1.5 liters

Sand trap, 1.5 liters

The sand trap fits in drains with an extension part or without trap.

Volume: 1.5 liters.
Capacity: 1.5 liters per second.

Part no. 220SF41

Sand trap, 0.9 liters

Sand trap, 0.9 liters

Volume: 0.9 liters.
Capacity: 1.5 liters per second.

Part no. 220SF61

Key for water trap

Key for water trap

Key for locking Water trap 220VA2.

Part no. 1NV1

Raising ring

Raising ring

Raising ring for tile floor type K1 with a height of 25 mm

Part no. 220FR12

Inlet part

Inlet part

Inlet part with Ø 50 mm connection. Increases total height by 82 mm.

Part no. 1VIN220

Grounding braid

Grounding braid

Grounding braid for equipotential bonding.

Part no. 1VJF

Screwed-down grate

Screwed-down grate

Grating fastened with screws.

Part no. 1VFG

Extension part

Extension part

Extension part, provides space for extra large accessories. Increases total height by 82 mm.

Part no. 1VPA220

Drain without trap

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

Capacity: 6 liters per second

Part no. 1VSU220

Adaptation for Timber Joists

Adaptation for Timber Joists

The product is designed for easy installation in timber joists with a plastic mat as the finished floor.

Part no. 1VTBF

Sealant Aqua Tät

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Mounting, threaded rod

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Bits for plastic mounting rod

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Plastic mounting rod

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Documents

Technical overview