Shoe and boot washer FURO 513

Robust and efficient shoe and boot wash made of stainless steel, consisting of a floor drain with a liftable sand trap and a stable footrest. Ideal for workplaces, sports and leisure facilities, or environments where shoes and boots need to be cleaned when moving between different hygiene zones.

Washing Station Design
The boot and shoe washer consists of floor drain FURO 113 with a liftable sand trap and a sturdy footrest made of a detachable Ø 51 x 2 mm pipe. The washing station is constructed from stainless steel EN 1.4301 or acid-resistant stainless steel EN 1.4404, ensuring corrosion resistance and long durability even in demanding environments.
Liftable Sand Trap
Comes with a liftable sand trap for efficient collection of dirt and gravel, making maintenance easy.
Stable Footrest
The footrest is made of a Ø 51 x 2 mm pipe for high stability and durability. The pipe can be detached if needed.
Adapted for Common Flooring Types
The floor drain is designed for embedding in concrete floors and is compatible with several common flooring types, featuring a 360° rotatable and angle-adjustable outlet.
About Floor Drain FURO 113
FURO 113 is a flexible floor drain designed for high water flows. It comes with a removable water trap with a handle for easy cleaning and maintenance, as well as EPDM rubber seals (EN 681-1 type Wc).
Read more about FURO 113 here.
Slip-Resistant Grating
The grating is slip-resistant to prevent accidents. It is designed in sections, with a maximum weight of 6 kg per section for easy handling.

Installation

Delivered covered to prevent concrete from entering the drain during casting (up to a width of 400 mm).
For resin flooring, spacer strips on the adhesion flanges are included.
Sturdy mounting brackets for various anchoring options in the floor slab are included.
Adjustable legs for easy installation and height adjustment are available. See the Installation Accessories section.

Technical Specification

Material: Stainless steel EN 1.4301 (SS 2333) or acid-resistant stainless steel EN 1.4404 (SS 2348)
Floor drain: FURO 113 with liftable sand trap
Length (mm): 300–2000
Width (mm): 300–1000
Footrest: Ø 51 x 2 mm detachable pipe
Water trap: Removable with a handle for easy cleaning
Seals: EPDM rubber seals according to EN 681-1 type Wc
Grating: Slip-resistant grating in sections, max weight 6 kg per section
Floor types: For embedding in concrete floors, compatible with tiled floors, resin floors, vinyl flooring, and steel-polished concrete floors

Information about CAD files: For CAD and MagiCAD usage, use the 3D model for FURO 113.

Variants

Variable length and width (mm):

Length (L) = 300–2000 (in increments of 100)
Width (B) = 300–1000 (in increments of 100)

The dimensions refer to the grate size of the drain.

Variable top section depth (mm):

Top section depth (D)* = 70, 100, 150, or 200

70 mm is recommended when a low installation height is required.
150/200 mm is recommended for extra buffer volume or for lengths over 800 mm (to ensure sufficient slope towards the outlet).

Dimensions for floor drain FURO 113:

*The product has a slope towards the outlet.

For more information, see the section:
"Water flow, total height, upper part depth, and slope towards outlet"

Construction dimensions for FURO 513:

S₁ = B (Grate dimensions) + 310 mm
F₁ = B (Grate dimensions) + 250 mm

Drains and channels always feature a connection pipe and a designated flow path. The flow path is measured along the bottom line of the pipe.

To simplify product selection, we specify the total height (H) of our drains and channels. The total height measures the distance from the finished floor level down to the point where water exits the product. For bottom outlets, the measuring point begins at the start of the socket.

The total height (H) consists of the upper section depth (D) plus the outlet section of the product. Increasing the upper section depth also increases the total height, which in turn affects the flow path.

Dimensions for FURO 513:

The upper section depth (D) can be selected as 70, 100, 150, or 200 mm (100 mm is standard for sizes up to 600x400 mm).
For tile types K4 and K5, the upper section depth (D) varies between 50, 80, 130, and 180 mm (80 mm is standard for lengths up to 2000 mm).
The total height (H) of FURO 113 therefore varies between 202, 232, 282, and 332 mm (232 mm is standard for sizes up to 600x400 mm).
If an extension or inlet section is selected, the total height (H) increases by 82 mm.

Slope Towards Outlet:

The product’s slope towards the outlet depends on its length and selected upper section depth (D). For the standard configuration with a centrally located outlet, the following recommendations apply:

For lengths between 1000–2000 mm and a recommended depth of 150 or 200 mm, the slope towards the outlet is at least 6%.

In cases where needs deviate from the above recommendations, the slope may be affected.

Trap

Part no. 220VH12

Trap with mechanical odor stop

Part no. 220VL12

Water trap, odor and backflow stop

Water trap with mechanical odor and backflow stop.

Part no. 220VLB12

Trap with shut-off function

Part no. 220VA2

Slip-resistant grid, L15

Slip-resistant grid with load class L15.

Maximum load: 1500 kg

Part no. Z-GALLER-L15

Strainer basket, 1,2 liters

Volume: 1.2 l
Capacity: 4.0 l/s

Part no. 220SK32

Sand trap, 0.9 liters

Volume: 0.9 l
Capacity: 1.5 l/s

Part no. 220SF61

Sand trap, 1.5 liters

The sand trap fits in drains with an extension part or without trap.

Volume: 1.5 l
Capacity: 1.5 l/s

Part no. 220SF41

Lifting tool

Practical and ergonomic lifting hook for safe handling of grates and perforated plates. Provides a stable grip and reduces the risk of injury when lifting. Ideal for maintenance and installation.

Part no. 1LK1

Key for water trap

Key for locking Water trap 220VA2.

Part no. 1NV1

Raising ring

Raising ring for tile floor type K1 with a height of 25 mm

Part no. 220FR12

Fastening of grating

Screw fastening of grating. Increases safety by preventing the grating from moving unintentionally.

Part no. 1VFG

Adaptation for Timber Joists

The product is designed for easy installation in timber joists with a plastic mat as the finished floor.

Part no. 1VTBF

Extension part

Extension part, provides space for extra large accessories. Increases total height by 82 mm.

Part no. 1VPA220

Inlet part

Inlet part with Ø 50 mm connection. Increases total height by 82 mm.

Part no. 1VIN220

Earth braid

Earth braid for potential equalization. Compatible with any attachment point on floor drains and channels.

For more information:
Installation instructions for earth braid

Part no. 1VJF

Drain without trap

Floor drain without built-in trap. A trap can be easily retrofitted if needed.

Capacity: 6 liters per second

Part no. 1VSU220

Mounting, threaded rod

Easy adjustment from above.

Height 300 mm.
Foot diameter = 100 mm.

Part no. 1SB30

Plastic mounting rod

Mounting rod that allows for easy adjustment from above.

Height: 300 mm
Foot diameter: 100 mm.

Use together with Installation accessories "Bits for plastic mounting rod".

Part no. 1SB40

Bits for plastic mounting rod

For easy height adjustment of plastic mounting rod.

Part no. 1BITS16

Sealant Aqua Tät

Sealant Aqua Tät for plastic flooring. Used under the flooring when installing the clamping frame.

Part no. 1AQUAT40

Documents

Technical overview (in swedish)

Installation instructions for earth braid