Elektriskt höj- och sänkbar bänk FURO 916-A

Flexibel diskbänk/arbetsbänk för exempelvis skola, sjukhus, butik och livsmedelsindustri. Höjdjusterbar med 200 eller 300 mm ställbarhet.
  • Ger möjlighet till individuell inställning av arbetshöjd. Ställbar höjd mellan 750-950 mm respektive 700-1000 mm.
  • Idealisk för skola, förskola, storkök, restaurang, livsmedelsbutik, livsmedelsindustri och sjukhus.
  • För sjukhusmiljöer med Vårdhygien klass 2, exempelvis vårdrum, sköljrum och desinfektionsrum. För Vårdhygien klass 3 se FURO 905.
  • Valfri längd mellan 500 och 3540 mm. Bredd 650 mm.
  • Bänkplan av 1,25 mm slipad rostfri plåt. Dubbel plåt används för ljuddämpande egenskaper.
  • Tillverkas helt i rostfritt stål i kvalitet EN 1.4301, helt utan organiska material. Se Variantutförande för bänkplan i syrafast rostfritt stål, EN 1.4404.
  • Stabil och slitstark konstruktion.
  • Många valmöjligheter med hjälp av alla tillbehör.

 

Specifikationer styrdon: 

  • Display med digital höjdvisning och fyra minneslägen. 
  • CE-märkt.
  • Nätspänning: 230 VAC.
  • Anslutning: Stickpropp.
  • Motorspänning: 24 VDC.
  • Lyfthastighet: 15 mm/sek.
  • Överströmsskydd.
  • Termisk säkring.
  • Denna bänk höjs och sänks med hjälp av knappar. Ställbarheten är 200 eller 300 mm. Om manuell vev önskas se FURO 916-M.
  • Sjukhus väljer, av hygieniska skäl, disklådor utan bräddavlopp. Vill man i skolmiljö eller storköksmiljö göra detsamma bör man kontrollera att golvbrunn finns i lokalen.

Variants

Build your countertop according to your measurements and preferences. Here, you can also equip your countertop with the accessories and additional details you want. 

Faucet hole

Diameter 35 mm. Standard placement (from the rear wall of the sink to the center of the faucet hole):

  • c/c 40 mm
  • c/c 55 mm (if the sink has an overflow on the rear wall)
     

Sinks wider than 450 mm require a bench width of 700 mm.

Part no. 9HB35

Acid-resistant countertop

Countertop in acid-resistant stainless steel, grade EN 1.4404.

Part no. 9VSFBP

Wider countertop

Countertop with a width of 700 mm.

Part no. 9VB700

Standard edge profiles

P

Edge profile P

Standard som framkant och gavlar. Kan även väljas som bakkant.

T

Edge profile T

Standard som bakkant. Kan även väljas som gavlar.

Edge profile variants

Edge profile G

Kan väljas som framkant, gavlar och bakkant.

Edge profile V

Kan väljas som gavlar och bakkant.

Täckning av kanter

Kantprofil T täcks i framkant om den väljs som gavel. Kantprofil V täcks alltid.

Sink BE-50

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BE501

Sink BE-50

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BE502

Sink BE-50

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BE50UB2

Sink BE-55

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BE551

Sink BE-55

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BE552

Sink BE-55

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BE55UB2

Sink BE-70

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BE701

Sink RLE-34

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9RLE341

Sink RLE-34

Basket waste included. Without overflow. Acid resistant quality EN 1.4404.

 

 

Part no. 9RLEL34UBK2

Sink Round Ø350

Sink with rinsing function, suitable for laboratory environments. Hygienic design without overflow. Delivered with a welded drain spout and hygienic strainer.

For more information:
Installation instructions for Flushing Rim

Part no. 9RS352

Sink BE-SPECIAL

Manufactured with custom dimensions. Maximum dimensions: 1600x500x480 mm [LxWxD] Minimum dimensions: 250x250x50 mm [LxWxD] Stainless steel grade EN 1.4301.

Part no. 9BESPEC1

Sink BE-SPECIAL

Manufactured with custom dimensions. Maximum dimensions: 1600x500x480 mm [LxWxD] Minimum dimensions: 250x250x50 mm [LxWxD] Acid resistant quality EN 1.4404.

Part no. 9BESPEC2

Sink BE-SPECIAL without overflow

Manufactured with custom dimensions. Maximum dimensions: 1600x500x480 mm [LxWxD] Minimum dimensions: 250x250x50 mm [LxWxD] Without overflow. Stainless steel grade EN 1.4301.

Part no. 9BESPECUB1

Sink BE-SPECIAL

Manufactured with custom dimensions. Maximum dimensions: 1600x500x480 mm [LxWxD] Minimum dimensions: 250x250x50 mm [LxWxD] Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BESPECUB2

Sink BE-SPECIAL

Stainless steel grade EN 1.4301. With overflow and strainer. Size 700x500x240 mm.

Part no. 9BE7050241

Sink BE-SPECIAL

Stainless steel grade EN 1.4301. With overflow and strainer. Size 700x500x360 mm.

Part no. 9BE7050361

Sinks BD-50 (double)

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BD501

Sink BD-50 (double)

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BD502

Sink BD-50 (double)

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BD50UB2

Sink BD-55 (double)

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BD551

Sink BD-55 (double)

With overflow. Acid resistant quality EN 1.4404.

Part no. 9BD552

Sink BD-55

Without overflow. Acid resistant quality EN 1.4404.

Part no. 9BD55UB2

Sinks BD-70 (double)

Stainless steel grade EN 1.4301. With overflow and strainer.

Part no. 9BD701

Sink RLD-34 (double)

Basket waste included. Stainless steel grade EN 1.4301.

Part no. 9RLD341

Sink RLD-34

Basket waste included. Without overflow. Acid resistant quality EN 1.4404.

Part no. 9RLDL34UBK2

Open rack

Rack without struts at the front, available for the entire length of the bench or a portion of the length.

Middle Shelf, sheet metal

Removable stainless steel shelf in sections

  • Depth: 500 mm

Part no. 996, gallerhylla

Undershelf, sheet metal

Removable stainless steel undershelf in sections.

  • Depth: 500 mm

Part no. 992

Wire Baskets

Drawer unit with three wire baskets in white-painted steel, mounted on stainless steel glide rails. Basket size: 427 x 427 x 185 mm.

Dimensions:

  • Width: 500 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 9TKT

Shut-off valve

Chromed ball valve with handle, thread size R 1 1/2”.

Part no. 990

Gypsum separator

Volume: 13 l.
Dimensions: 360 x 370 x 430 mm.
Installation: The countertop must be mounted flush against the wall. The gypsum separator can be installed within the range of 200–405 mm from the wall (c/c measurement from the separator's inlet to the wall).
Front supports and any shelf/grate are excluded when installing the gypsum separator.

Part no. 9GA

Strainer bucket

Strainer bucket with a liftable strainer basket placed in the wash basin. Can only be used in combination with BE, BD, and K wash basins.

  • Volume: 1.6 liters.

Part no. 9SH

Gallerunderhylla

Shelf made of stainless steel grate. The grate is recessed between the front and back braces and is removable in sections.

  • Depth: 500 mm

Part no. 991

Middle Shelf

Removable stainless steel shelf in sections.

  • Depth: 500 mm
     

Art.nr: 997, raised back edge
Art.nr: 997-01, flat shelf
Art.nr: 996, grid shelf

Cabinet, Single Door

Cabinet with a bottom shelf and one removable shelf, adjustable in five positions. The door has concealed, self-closing hinges with soft-close function for quiet closing.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 972-01V, vänsterhängd dörr

Part no. 972-01H, högerhängd dörr

Part no. 972EH400

Cabinet, Double Doors

Cabinet with a base and one removable shelf, adjustable in five positions. Doors have concealed, self-closing hinges with soft-close function for quiet closing. Specify width and placement.

  • Width: 600, 800, 1000, 1200 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 972-02D

Part no. 972EH800

Drawer Unit, 3 Drawers

A drawer unit with three fully extendable drawers that slide on stored expansion fittings. The drawers with a width of 400 mm come with plastic containers, while the others have metal insert boxes. Please specify the width and placement.

  • Width: 400, 500, 600 mm
  • Height: 600 mm
  • Depth: 575 mm

Part no. 975-01

Drawer

A fully extendable drawer that slides on stored expansion fittings. The drawer with a width of 400 mm comes with a plastic insert, while the other sizes feature a metal insert.

  • Width: 400, 500, 600 mm
  • Height: 185 mm
  • Depth: 575 mm

Part no. 981-01

SH.png BVB.svg

Do you have any questions?

Do you have questions and concerns about production or do you need help with planning?

Common questions Contact us

BIM

Do you need BIM or CAD files for your project? Download the files you need by clicking the buttons below.

Magicad Cloud MagiCAD Selection tool